manualshive.com logo in svg

HandHeld Dolphin 9500 Series, User Manual, Page: 236 / 264

Share
Download
HandHeld Dolphin 9500 Series User Manual Download Page 236

14 - 2

Rev C

 Dolphin® 9500 Series User’s Guide

Charge LEDs

Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see 

Charging Terminals in the ChargeBase

 on page 

14-4.

Back Panel   

Power Supply Connector

This connector receives input from the power adapter. Plug the power connector cable from the power adapter into 
this connector. There is no ON/OFF switch on the back panel of the ChargeBase. The power switch is on the power 
adapter.

Power Supply

The ChargeBase includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter is 
plugged into standard AC/DC outlets.

Power Supply Connector

Summary of Contents for Dolphin 9500 Series









































































































































































































































































Reviews:

No comments