manualshive.com logo in svg

HandHeld Dolphin 9500 Series, User Manual

Share
Download
HandHeld Dolphin 9500 Series User Manual Download Page 226

13 - 2

Rev C

 Dolphin® 9500 Series User’s Guide

Mobile Base Parts and Functions

Front Panel

The front panel of the Mobile Base has one slot. The following graphic features the Mobile Base with the Dolphin 9500 inserted 
into the terminal well.

Terminal Well 

Place the terminal in this well to communicate with a host device and charge the main battery pack. 

Mounting Brackets

Use these to mount the Mobile Base to a fixed location.

DOCK LED 

Illuminates solid green when the Dolphin terminal is properly seated in the terminal well.

COMM LED

   

Indicates the status of data transfer between the host device and the Dolphin terminal

COMM LED color

Indicates that…

Red 

Data is being sent from the Host Device to the Dolphin

 

Mobile Base. 

Green 

Data is being sent from the Dolphin Mobile Base to the Host Device.

Orange 

Data is being sent at high data rates.

Terminal Well

COMM LED

Mounting 
Brackets

DOCK LED

Summary of Contents for Dolphin 9500 Series









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands