AI-006 operation manual
release 12.10.29 R01, HMI version 25, plc version 107>, servo version 102>
P.35 of 44
>
Advance Operation (cont.)
>> Individual Program for Start/ Middle/ end of Tape
AI-006 can recognize the stage of sealing the machine is in, individual programs can be used to
change the behavior of the machines according to whether the stage is in the start, middle or
end of sealing. To invoke the set up pages of these programs, touch the respective area in the
seam tape graphic symbols as illustrated below:
1
upper roller symbol
2
fabric symbol
3
seam tape symbol
4
touch this area to enter into tape start programming page
5
touch this area to enter into tape middle programming page
6
touch this area to enter into tape end programming page
7
air nozzle symbol
On the individual programing pages, parameters that can be altered are represented by blinking
symbols. Touch these symbols to enter into corresponding data entry mode. Simple explanation
and range of the parameter will be shown up at this time.
Note: since the operating software is being upgraded constantly to accommodate new features, please refer to the on
screen menu on the touch screen control panel for further explanation.
1
7
6
5
4
3
2