AI-006 operation manual
release 12.10.29 R01, HMI version 25, plc version 107>, servo version 102>
P.28 of 44
>
Advance operation (cont.)
>> Advance Mode
Traditional hot air machine has only two nozzle positions, swing in and swing out. AI-006 has an
additional position called ‘hovering’ position in between.
The new feature ‘advance mode’ keeps the nozzle in the ‘hovering’ position during temporary
stop.
When the advance mode is enabled, the hovering nozzle will keep the seam tape warm to
improve water leakage problem during start/stop operation.
During advance mode, the nozzle will only stay in the hovering position for a maximum of 2
seconds. After that the nozzle will move back to the home position.
Press to ON to enable advance mode
