AI-006 operation manual
release 12.10.29 R01, HMI version 25, plc version 107>, servo version 102>
P.34 of 44
>
Advance Operation (cont.)
>> Memory
All operating parameters of the machine including operation data, nozzle position and
personality can be stored into one of the 20 memory locations. The data from these locations
can be recalled as the current machine setting at any time.
To store the current setting into the memory locations
Press and hold the number of memory location wanted to store data for 5 seconds, a beep will
sound to confirm the storage is successful.
To recall the data from the memory location to the current setting
Press and hold the memory location number that the data wanted to be retrieved for 5 seconds,
a beep will sound to confirm that the data in that location is read and copied in the current
machine setting area.
WARNING !
Please note that the area to be written (either system area or memory locations) do not
have any useful settings before transferring data. Once the data is copied, the original
data in the target is overwritten.