manualshive.com logo in svg

Hand Held Products 2020, User Manual

Share
Download
Hand Held Products 2020 User Manual Download Page 5

Patents

Please refer to product packaging for patent information.

LED Safety Statement

This device has been tested in accordance with IEC60825-1 LED safety, and 
has been certified to be under the limits of a Class 1 LED device.

GS Mark

If your product is marked with the GS symbol, then the product has 
been issued a GS certificate showing compliance to IEC 60950-1 and 
IEC 60825-1.

UL and cUL Statement

UL and cUL listed: UL60950-1 and CSA C22.2 No.60950-1-03.

C-Tick Statement

Conforms to AS/NZS 3548.  C-Tick number: N10410.

Mexico

Safety approval conforms to NOM-019.

Comision Federal de Telecomunicaciones (radio 

approval)

Solids and Water Protection

The 2020 and 4820 have ratings of IP41, immunity of foreign particles and 
dripping water.  
The 4820i has a rating of IP54, immunity of foreign particles and sprayed water.

Summary of Contents for 2020

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands