Hand Held Products 2020, User Manual

Page: 190 / 280

8 - 20 2020/4820/4820 i User’s Guide
X - Horizontal Barcode Offset
The horizontal barcode offset allows you to offset the horizontal center of the
signature capture area. Positive values move the horizontal center to the
right and negative values to the left. Measurements are in multiples of the
minimum bar width.
Y - Vertical Barcode Offset
The vertical barcode offset allows you to offset the vertical center of the
signature capture area. Negative numbers indicate that the signature
capture is above the barcode, and positive numbers indicate that the area is
below the barcode. Measurements are in multiples of the minimum bar
width.
RF Default Imaging Device
The image scanner supports imaging command processing (IMGSHP, IMGSNP,
IMGBOX) so that Quick*View (see
"Quick*View" on page 11-6) and other
applications are able to perform imaging functions as if they were talking directly
to an image scanner. To accomplish this, the image scanner uses a menu
command called RF_DID (RF Default Imaging Device). RF_DID is the name of
the image scanner (BT_NAM) that is to receive imaging commands. The default
for RF_DID is “*”indicating that imaging commands are to be sent to all
associated image scanners. Change this setting to RF_DID
image
scanner_name to ensure that they are sent to a particular image scanner. Refer
to
"Image Scanner Report" on page 11-2 to generate a report containing the
port, work group, image scanner name, and address for each image scanner.
Refer to
"Image Scanner Name" on page 3-8 set a unique name for each image
scanner.
Example of Horizontal Offset set to -75X:
Example of Horizontal Offset set to 75X:
Example of Vertical Offset set to -7Y:
Example of Vertical Offset set to 65Y: