Hand Held Products 2020, User Manual

Page: 110 / 280

5 - 6 2020/4820/4820 i User’s Guide
Note: Intercharacter delays are not supported in USB serial emulation.
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed after the
transmission of a particular character of scanned data. Scan the
Delay Length
barcode below, then scan the number of milliseconds and the SAVE barcode
using the Programming Chart inside the back cover of this manual.
Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value
for the ASCII character that will trigger the delay Code Page Mapping of Printed
Barcodes on page A-6.
To remove this delay, scan the Delay Length barcode, and set the number of
steps to 0. Scan the SAVE barcode using the Programming Chart inside the
back cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds may be placed between the
transmission of each segment of the message string. Scan the
Interfunction
Delay barcode below, then scan the number of milliseconds and the SAVE
barcode using the Programming Chart inside the back cover of this manual.
To remove this delay, scan the Interfunction Delay barcode, then set the
number of steps to 0. Scan the SAVE barcode using the Programming Chart
inside the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix Scanned Data Suffix
1 2 3 4 5 STX HT CR LF
Interfunction Delay