14.09.2020
5 / 156
VARMAX -
Installation, Use and Maintenance
1. WARNINGS AND RECOMMENDATIONS
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
CARRYING OUT MAINTENANCE AND USING THE BOILER. IT CONTAINS
IMPORTANT SAFETY INFORMATION.
1.1. Transport and storage
The boiler:
- must be stored vertically in an environment where the temperature is
between -20°C and +55°C, and where relative humidity is between 5%
and 95%;
- must not be stacked,
- must be protected from humidity.
1.2. Symbols used in this document.
INFORMATION:
This symbol draws attention to comments.
WARNING:
Not following these instructions may lead to
damage when installing or to other objects.
DANGER:
Not following these instructions may cause
injuries and serious material damage.
DANGER:
Not following these instructions may cause
electrocution.
1.3.
Qualification of personnel for installing, adjusting, using and
maintaining the equipment
Boiler installation, adjustment and maintenance operations must be
conducted by a qualified and approved professional in accordance with
prevailing local and national regulations. These operations may require work
to be carried out with the power turned on and the casing doors (on the front
of the boiler) open.
Basic utilisation operations must be carried out with the casing doors closed.
1.4.
Safety instructions
•
Always switch the boiler off and shut off the general gas supply before
carrying out any work on the boiler.
•
After performing work on the boiler (maintenance or breakdown), check
that there are no gas leaks from the installation.
INFORMATION:
VARMAX boilers are available with 2/3 tappings or 4 tappings. It is not
possible to transform a version with 2/3 tappings into a version with
4 tappings and vice versa.
