HAMWORTHY HEATING LTD
20
SHAFTESBURY HE
500001049/N
6. Position and fit rear cover to rear
of casing using M5 x 10 posi screws
and washers.
Note: Ensure that rear cover is
located in correct position as
indicated below.
Figure 10.19
Figure 10.20
Figure 10.21
7. After fitting control panel, snap lower front cover into place,
locating pre-fitted latches and strikers. Finally, locate upper front
cover on locators in upper edge of lower front cover and push
into place on locators on side panels.
