EZMaster
EZMaster
User’s Guide
Page 33 of 53
Function Buttons
ESC
Stop any Keyer activity, both CW or SSB, Play or Rec.
F1
Play/send the 1st message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F2
Play/send the 2nd message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F3
Play/send the 3rd message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F4
Play/send the 4th message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F5
Play/send the 5th message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F6
Play/send the 6th message, both SSB or CW. (
CW messages are not editable, for test purpose only)
F7
Play/send the 7en message, both SSB or CW. (
CW messages are not editable, for test purpose only)
Band Map Profile frame
The Band Map profile is one of the highlight functions of EZMaster.
It allows you to define which output line of the MATRIX DB25 connector will close and, consequently, which connected Relay, or any
other supported device, i.e. LED matrix, low consumption lamps, etc., will be activated.
The idea behind profiles is simple: for each band, for each radio, either in RX or in TX mode, each one of the 32 ports can be
configured to enable or disable (ON/OFF) the corresponding line.
Comprehensive combinations of antenna switches can be managed, covering virtually any imaginable switching need.
To enable an output simply select the checkbox in the related row and column, and your output relay will close, thus enabling the
connected device.
This configuration can be saved and reloaded later to be used or edited: a
*.txt
file is in fact generated so an import can be possible
later.
In this way the user can define the configuration with EZManager and then use it even within another application that supports this
mode.
These configurations are not saved in EZMaster.
