*#1 :-
Owner’s Manual
Appendix
95
NRPN MSB/LSB
RPN MSB/LSB
Status
2nd Byte 3rd Byte
Status
2nd Byte 3rd Byte
Bn
63
mm
(MSB)
Bn
65
mm
(MSB)
Bn
62
ll
(LSB)
Bn
64
ll
(LSB)
n=MIDI Channel Number:
0 - F(Ch.1 - 16)
n=MIDI Channel Number:
0 - F(Ch.1 - 16)
mm=Upper Byte of the Parameter Number designated by NRPN[MSB].
mm=Upper Byte of the Parameter Number designated by RPN[MSB].
ll=Lower Byte of same[MSB].
ll=Lower Byte of same[MSB].
The value set by NRPN is not reset even if "Program Change",
The Value set by RPN is not reset by receiving the "Program Change",
"Reset All controllers", etc. are received.
"Reset All Controllers", etc.
NRPN- "Non Registered Parameter Number"
RPN- "Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change,
The expansive range named RPN is provided in the Control Change,
which function is specific on each equipment and not defined in the
which function is specific on each equipment and not defined in the
MIDI Standard.
MIDI Standard.
When you use it, designate the parameter to control, by giving NRPN MSB
When you use it, designate the parameter to control, by giving RPN MSB
and NRPN LSB (cc#98 and 99), and the set the value of the designated
and RRN LSB(cc#101 and 100), and then set the value of the desgnated
parameter by the Data Entry MSB(cc#6).
parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into
Once the RPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null
parameter. To avoide any mis-operation, we suggest you to set RPN Null,
(RPN = 7F 7F), after setting the necessary parameter value.
after setting the necessary parameter value.
On this sound module you can change the voice parameter by using
NRPN.
Master Coarse Tuning
Data Entry
RPN MSB
RPN LSB
Status
2nd Byte 3rd Byte
00
02
3A - 40 - 46 (-6 - 0 - +6 semitones)
Bn
06
mm
(MSB)
This message will sent as Transpose for external zones.
Bn
26
ll
(LSB)
n=MIDI Channel Number:
0 - F(Ch.1 - 16)
mm,ll=Value for the Parameter designated by RPN/NRPN.
DATA MSB
Control number:
Upper
50h(80)
Lower
51h(81)
Pedal
52h(82)
Data Map:
Level
16'
5 1/3'
8'
4'
2 2/3'
2'
1 3/5' 1 1/3'
1'
16'
8'
0
00h(0)
09h(9)
12h(18)
1Bh(27)
24h(36)
2Dh(45)
36h(54)
3Fh(63)
48h(72)
00h(0)
09h(9)
1
01h(1)
0Ah(10)
13h(19)
1Ch(28)
25h(37)
2Eh(46)
37h(55)
40h(64)
49h(73)
01h(1)
0Ah(10)
2
02h(2)
0Bh(11)
14h(20)
1Dh(29)
26h(38)
2Fh(47)
38h(56)
41h(65)
4Ah(74)
02h(2)
0Bh(11)
3
03h(3)
0Ch(12)
15h(21)
1Eh(30)
27h(39)
30h(48)
39h(57)
42h(66)
4Bh(75)
03h(3)
0Ch(12)
4
04h(4)
0Dh(13)
16h(22)
1Fh(31)
28h(40)
31h(49)
3Ah(58)
43h(67)
4Ch(76)
04h(4)
0Dh(13)
5
05h(5)
0Eh(14)
17h(23)
20h(32)
29h(41)
32h(50)
3Bh(59)
44h(68)
4Dh(77)
05h(5)
0Eh(14)
6
06h(6)
0Fh(15)
18h(24)
21h(33)
2Ah(42)
33h(51)
3Ch(60)
45h(69)
4Eh(78)
06h(6)
0Fh(15)
7
07h(7)
10h(16)
19h(25)
22h(34)
2Bh(43)
34h(52)
3Dh(61)
46h(70)
4Fh(79)
07h(7)
10h(16)
8
08h(8)
11h(17)
1Ah(26)
23h(35)
2Ch(44)
35h(53)
3Eh(62)
47h(71)
50h(80)
08h(8)
11h(17)
ex: Set Lower 8' to level 7 via MIDI...
Bx 51 19
(x=Lower Channel)
Pedal
Upper/Lower
Drawbar Data List
Summary of Contents for XK-1
