Hammond XK-1, Owner'S Manual

Page: 56 / 108

*#1 :-
Owner’s Manual
56
In this mode, you can name the Combination Presets.
To locate this mode:
Touch the [MENU/EXIT] button and display MENU, then touch the [PAGE] button to
select PAGE A and touch the [2] PRESET button.
PRESET
 PRESET NAME
1. Preset Name (P)
This allows you to name the present Combination Presets using
up to 10 letters.
Move the cursor with the [PARAM] button, and choose the
letters with the [VALUE] button or the [VALUE] knob.
This change will be lost if you do not record it, same as the
other Preset Parameters.
NOTE: The parameters by the names with (P) on the tail are
Preset Parameters, and are recorded to each Combina-
tion Preset.
 PRESET LOAD
This allows you to set the operation when you depress the
Preset Key.
2. PRESET LOAD - UPPER (B)
This allows you to set whether or not to recall the Drawbar
Registration of UPPER Part.
3. PRESET LOAD - LINK LOWER/PEDAL (G)
This allows you to determine whether or not to recall the
Drawbar Registration of the LOWER and PEDAL Part.
4. PRESET LOAD - DRAWBAR (B)
This allows you to determine whether or not to recall the
Parameters relating to the Drawbars of each Part, such as the
Tonewheel Set.
5. PRESET LOAD - PERCUSSION (B)
This allows you to determine whether or not to select PER-
CUSSION by the Preset buttons other than [ADJUST] key and
recall the Parameters relating to Percussion.
6. PRESET LOAD - INTERNAL ZONE (B)
This allows you to determine whether or not to recall the
Parameters relating to the Internal Zone such as SPLIT or
MANUAL BASS.
7. PRESET LOAD - EXTERNAL ZONE (B)
This allows you to determine whether or not to recall the
Parameters relating to the External Zone to control the outside
MIDI equipment.
8. PRESET LOAD - EQ/RV (B)
This allows you to determine whether or not to recall the
Parameters relating to the EQUALIZER and REVERB.
9. PRESET LOAD - ANI/OD (B)
This allows you to determine whether or not to recall the
Parameters relating to VIBRATO, OVERDRIVE and LESLIE.
10. PRESET LOAD - EXTRA VOICE (B)
This allows you to determine whether or not to recall the
Parameters relating to EXTRA VOICE.
NOTE: Each Parameter (B) of Preset Load is a Bank Parameter
(except Link Lower/Pedal). It is set only for the BANK
currently selected. Link Lower/Pedal is a Global
Parameter. It is common on all the banks.
10 9 8
4 5 6 7
1
2 3