Hammond Skx PRO, Reference Manual, Page: 570 / 754

550
Equalizer
5. Press the PAGE “
u
” button ten times. The Information Center Display should now look like
this:
You are now in Page 11 of the PATCH EDIT -SYNTH FUNCTION Mode. You can now use the
DIRECTION and PAGE buttons in conjunction with the VALUE knob to make various changes
to the characteristics of the MONO SYNTH.
NOTE: The EQUALIZER Parameters are identical for all Voice Sections except for one additional
Parameter in the ORGAN Voice Section. . To avoid confusing repetition, the ORGAN Voice Section
will be used as the basis for the explanations of these Parameters.
NOTE: The violet-colored shapes on the right side of the screen are visual representations of the
shapes of the selected Parameters. You will see their shapes change in response to the edits you make.
BASS - Bass Central Frequency Adjust and Gain
These Parameters allow you to adjust the central frequency and amount of the Bass frequency band. You
can select from 20Hz to 200Hz.
Use the DIRECTION “ t ” and “ u ” buttons to select either FREQ or GAIN for the Bass frequencies.
Turn the VALUE knob to the right to increase the setting.
Turn the VALUE knob to the left to decrease the setting.
From the above screen, press the DIRECTION “ u ” button once.
The box underneath “MID” should be highlighted.
MID - Midrange Central Frequency Adjust, Gain and Resonance (“Q”)
These Parameters allow you to adjust the central frequency, amount and resonance of the Midrange
frequency band. You can select from 250Hz to 3.1kHz.
Use the DIRECTION “ t ” and “ u ” buttons to select either FREQ or GAIN for the Midrange frequencies.
Turn the VALUE knob to the right to increase the setting.
Turn the VALUE knob to the left to decrease the setting.
HA<O>
SKX PRO Reference Guide