Hammond Skx PRO, Reference Manual, Page: 380 / 754

360
MONO SYNTH Voice Section
From the screen shown on the previous page, press the DIRECTION “ q ” button two times
(skip the blank box).
The box to the right of “MOD SOURCE” should be highlighted.
MOD.SOURCE
This Parameter allows you to select the source of the Modulation. The data chart below shows the options
you can select.
MODULATION SOURCE Options
Parameter Description
P.EG (Pitch Envelope) The Modulation is regulated by the Pitch Envelope. Using the PITCH & FILTER
ENVELOPE sliders will allow you to change the duty cycle or tonality of the sound
while a key is pressed and held.
LFO A periodic pitch-shift (vibrato-like effect) is added by the Low-Frequency Oscillator (LFO).
Use the OSCILLATOR DEPTH slider to control the amount of modulation. Use the
LFO RATE knob to control the rate of modulation.
Note The Modulation changes by note. The duty cycle or tonality of the waveform will change
as keys are played higher or lower on the keyboard. Use the OSCILLATOR DEPTH
slider to adjust the amount of change from note to note.
Turn the VALUE knob to make your selection.
HA<O>
SKX PRO Reference Guide