Hammond Skx PRO, Reference Manual, Page: 349 / 754

329
MONO SYNTH Voice Section
t
VEL
From the above screen, Press the DIRECTION “ u ” button once. The Information Center Display
should now look like this:
This Parameter allows you to select how the MONO SYNTH Voice Section will respond to key
velocity. The data chart below shows the options you can select.
VELOCITY CURVE Options
Paramete
r
Description
Off Standard “organ” touch - the notes play at a fixed velocity (“100”) regardless of a light or heavy
keystroke.
1 This is the most exaggerated velocity curve, most like an acoustic piano
2 Less exaggerated than “1.”
3 Less exaggerated than “2.”
4 This is the smallest change of response to key velocity.
Turn the VALUE knob to make your selection.
NOTE: The function of this Parameter is duplicated by the VEL (Velocity) Parameter in the
COMBINATION FUNCTION Mode. For more information consult page 57.
t
VOL
From the above screen, Press the DIRECTION “
u
” button once. The Information Center Display
should now look like this:
This Parameter allows you to adjust the Volume of the MONO SYNTH Section. You can select from 0 (no
volume) to 127 (maximum volume).
Turn either the VALUE knob or the MONO SYNTH VOLUME knob to the right to increase the Volume.
Turn either the VALUE knob or the MONO SYNTH VOLUME knob to the left to decrease the Volume.
NOTE: The function of this Parameter is duplicated by the VOL (Volume) Parameter in the
COMBINATION FUNCTION Mode. For more information consult page 57.
HA<O>
SKX PRO Reference Guide