Hammond Skx PRO, Reference Manual, Page: 141 / 754

121
Patches
4. Press the ENTER button. The Information Center Display should now look like this:
The box to the right of “ORGAN” should be highlighted.
COMBI PATCH LOAD
You can now select which portions of the instrument will be Loaded when a Combination is
selected. These Parameters are explained starting below.
SECTION
The settings of these Parameters determine which Voice Sections will change when a Combination is
selected. In this way, if you want only particular Voice Sections to change each time you select a different
Combination, you can turn the desired Voice Section “ON” or “OFF.”
Use the DIRECTION “
p
” and “
q
” buttons to move up and down among the Voice Sections.
Turn the VALUE knob to turn the selected Voice Section “ON” or “OFF.”
From the above screen, press the DIRECTION “ u ” button once.
The box to the right of “INT ZONE” should be highlighted.
OTHER
The settings of these Parameters determine whether Internal Zones, External Zones or Reverb settings will
change when a Combination is selected.
Use the DIRECTION “
p
” and “
q
” buttons to move up and down among the OTHER Sections.
Turn the VALUE knob to turn the selected Section “ON” or “OFF.”
HA<O>
SKX PRO Reference Guide