Hammond Skx PRO, Reference Manual, Page: 25 / 754

5
Introduction
INDIVIDUAL OUT jacks
Use these jacks if you want to output the Outputs the selected Section independently.
AUX IN jack
Use the AUX IN jack to connect an external audio source. When connected, the sound will be
mixed with the internal keyboard sounds and sent out to the LINE OUT jacks and the
Stationary channel of a multi-channel Leslie Speaker via the 11-pin socket. Use the AUX LEVEL
knob to adjust the volume of the sound coming in from the AUX IN jack.
-
t
CONTROLLER JACKS
FOOT SWITCH jacks
Use these jacks to connect Foot Switches to control a functions such as Leslie speeds or
change Combinations. Th e recommended Foot Switches are listed below;
HAMMOND . . . FS-9H, VFP1
BOSS. . . . . FS-5U
YAMAHA. . . . FC4A, FC5
In addition, the FS-10TL Leslie Switch (not available in Europe) can be connected to the
FOOT SWITCH 1 jack.
EXP PEDAL jack
Use this jack to connect an Expression Pedal to control volume while playing. The
recommended Expression Pedals are listed below:
HAMMOND . . . EXP-50J, EXP-20, V-20H, V-20R; NORM
KORG. . . . . XVP-10, XVP-20; REV
ROLAND. . . . EV-5; NORM
YAMAHA. . . . FC7; REV
DAMPER PEDAL jack
Use this jack to connect a Damper Pedal (Sustain Pedal) for holding notes when keys are
played and released. Th e recommended Damper Pedals are listed below:
HAMMOND . . . FS-9H, VFP1
ROLAND. . . . DP-10
YAMAHA. . . . FC3A, FC4A, FC5
-
t MIDI Ports
MIDI IN
Transmits MIDI data to a connected MIDI device.
MIDI OUT
Receives MIDI data to from a connected MIDI device.
-
t USB PORTS
TO HOST
Use this to connect to a computer to transmit MIDI messages or Load and Save files such as
Setups, Patches or Custom files as well as System Update files.
TO FLASH DRIVE
Use this to connect a USB Flash Drive to Load or Save files such as Setups, Patches or Custom
files as well as System Update files.
HA<O>
SKX PRO Reference Guide