Hammer A2-26 Page 56 Operating Instructions Manual Download

Page: 56 / 94

Use

9 Use

9.1

Switch on / switch off / shutdown due to an emergency stop

WARNING
Insufficient preparation

Severe injuries and damage to equipment

−

Do not start the machine until all prerequisites have been met

and all preparatory work has been completed.

−

Read the instructions for setup, adjustment and operation

before turning on the machine.

NOTICE
Operating / Room temperature

Damages due to storage, material damage

−

The machine may only be operated in dry and frost-free rooms

at temperatures b10 and +40 °C.

Fig. 41: Switching on and off

1 Green start button

2 Red stop button - switch machine off

Switching on

Connect the machine to the main power supply.

Switch on the cutterblock and feed with the green

[start]

button.

Switch off

Press the red

[Stop]

button.

Disconnect the machine from the main power supply.

Summary of Contents for A2-26































































































Search results

Summary of Contents for A2-26

Reviews:

Related manuals for A2-26

Brands by name

Popular brands

Hammer A2-26, Operating Instructions Manual

Search results

Summary of Contents for A2-26

Reviews:

Related manuals for A2-26

Brands by name

Popular brands