51
A2-26
Adjustments and tool changes
8.1.6
Changing over from a planer to a thicknesser
1
2
3
4
5
Fig. 35: Preparing to changeover
1 Planer guard clamp
2 Tilt the bridge guard away
3 Planer fence clamp
4 Remove the planer fence
5 Loosen the extraction hose
Preparing the machine to changeover
1.
Switch off the machine and secure it against being switched on again.
2.
Release the planer guard clamp.
3.
Turn the bridge guard by 180° and clamp again.
4.
Release the planer fence clamp.
5.
Pull the planer fence all the way to the front and remove it.
6.
Remove the extraction hose from the extraction hood.
1
2
3
4
5
Fig. 36: Open planer table
1 Planer table clamping lever (infeed side)
2 Safety catch (infeed side)
3 Planer table clamping lever (outfeed side)
4 Safety catch (outfeed side)
5 Swing up the extraction hood
