14
Temperature
RPMx100 / Throttle-Channel (%)
Status
Pump- or. Battery- Voltage
Hammer Engines GmbH / IQ-Serie / Instruction Manual
Status Readout on EDT
You can browse through the respective status readout screens by pressing the
-buttons.
Once switched on the following Screen 1 will be displayed by default:
Temperature
: Current operating temperature of the turbine
RPM
: Current revolutions per minute x 1.000
Status
: Current Status (OFF, READY, AUTOMATIC etc...
(see below)
Pump Voltage
: current pump voltage (can be changed to battery voltage)
Display Symbols
• Battery fully charged
§ Battery ok
¶ Battery empty
¢ Burner defect
† Pump running/Pump Voltage
Should an error occur (Battery empty, Burner defect etc) the IO-Board will emit an alarm
tone.
