21
Hammer Engines GmbH / IQ-Serie / Instruction Manual
Activates the Telemetry transmitter (TRX-2400).
Amount of Data packets per time unit (OFF/1x/2x/3x),
channel transmitted on (COM-CHANNEL 0-10) and the
address of the Graphic-Telemetry (0-10000). Please
refer to the corresponding manuals for further
information.
↓
IMPORTANT !
This will reset the ECU to factory settings.
___________________________________________________________________________
↓
Menu point 4 will display stored as well as current GPS and Airspeed-date generated by
the GAS-Module.
Latitude and Longitude:
Displays current Geo-Information in Latitude and Longitude.
UTC-TIME – valid positioning – Heading – Satellites:
UTC (U): The second screen displays the UTC-Time in H-M-S format. Depending on the
time zone you will need to add or subtract accordingly.
Valid positioning (NOK-OK-3D): The top right corner shows whether your current
positioning is valid. As follows: NOK = not OKay, OK. = OKay, but only in 2D and 3D. =
OKay in 3D .
Heading (C): Heading in degrees.
Satellites (SAT): Amount of satellites connected at the moment. The higher the amount the
more precise will the read out GPS positioning will be. As a rule you should be connected to a
minimum of 7 satellites.
