MW028 - INSTRUCTION MANUAL
5
4.1 Standard settings for all watches
Important
: in order to guarantee the water-resistance
of your watch, always return the crown to its normal
position (p0) after any adjustment has been made.
Setting the date and the day *
1.
Pull out the crown
C
to position (p1).
2.
Turn the crown clockwise* or counterclockwise* to
set the date or the day.
3.
Push the crown back in to position (p0).
* according to model
Automatic chronograph and GMT watches:
Please abstain
from correcting the date or the day between 8 p.m. and
2 a.m.
Setting the time
1.
Pull out the crown
C
completely to position (p2): the
seconds hand stops*.
2.
Set the time by turning the crown in the desired
direction.
3.
Push the crown back in to position (p0): the seconds
hand starts again, allowing perfect synchronization
with a time signal.
* according to model
4.2 Special Settings: Quartz chronograph
Caliber 251.272 • 251.274 • 251.471 • 251.474
Setting the time zone and the date
1.
Pull out the crown
C
to position (p1).
2.
Turn the crown in the desired direction to set the hour
hand. The hour hand moves forwards or backwards
in one-hour jumps. The date changes each time the
hour hand passes 12 o’ clock midnight.
3.
Push the crown back in to position (p0).
Adjustment of the counter hands
After a battery change or a violent shock, it is possible
that one or more counter hands are no longer exactly at
zero. If this is the case, proceed as follows to adjust them:
Caliber 251.274 • 251.474 • G10.212
1.
Pull out the crown
C
to position (p1).
2.
Press button
A
to select the hand to be adjusted. The
hand selected will rotate 360°.
3.
Press button
B
to move the selected hand forward.
4.
Push the crown back in to position (p0).
Caliber 251.272 • 251.471
1.
Pull out the crown
C
to position (p1).
2.
Press button
B
to set the 30-minute counter hand to
zero.
3.
Pull out the crown
C
to position (p2).
4.
Press button
A
to set the 60-second counter hand to
zero.
5.
Press button
B
to set the 1/10 of a second counter
hand to zero.
6.
Push the crown back in to position (p0).
Caliber G10.211
1.
Pull out the crown
C
to position (p1).
2.
Press button
A
to set the 1/10 of a second counter
hand to zero.
3.
Press button
B
to set the 60-second counter hand to
zero.
4.
Pull out the crown
C
to position (p2).
5.
Press button
A
to set the 30-minute counter hand to
zero.
6.
Push the crown back in to position (p0).
4. Settings