Document #101-0086
23
5/22/07
Proceed Prompts
This category is used to select the sequencing messages that are seen after a customer pays for parking
and is waiting to proceed into the wash. There are up to four sequencing Proceed Prompts possible.
These four messages may be chosen from a list of pre-programmed messages or a custom message may
be created. Up to eight different custom messages can be programmed. If a ninth custom message is
attempted, it overwrites the first custom message programmed. Once a custom message is programmed,
it will be listed along with the pre-programmed messages when scrolling through the available mes-
sage choices. These custom messages can be deselected or overwritten, but never erased. If you do not
wish to use all four messages, simply program the desired messages with the pre-programmed or
custom messages and program the remaining messages with the “-NOT USED-” message located in
the pre-programmed message list. This message will not appear on the screen. When this message is
encountered in the message sequence, it automatically skips to the next message in the sequence with-
out any time delay.
Proceed Prompts Example: To guide a customer through a transaction, the follow-
ing messages may be selected:
PROCEED MESSAGE #1
“THANK YOU”
PROCEED MESSAGE #2
“PLEASE DRIVE AHEAD”
PROCEED MESSAGE #3
“-NOT USED-”
PROCEED MESSAGE #4
“-NOT USED-”
Welcome Prompts
This category is used to select the sequencing messages that are seen when a customer first pulls up to
the GL-ACW-P. There are up to four sequencing Welcome Messages possible. These four messages
may be chosen from a list of pre-programmed messages or a custom message may be created. Up to
eight different custom messages can be programmed. If a ninth custom message is attempted, it over-
writes the first custom message programmed. Once a custom message is programmed, it will be listed
along with the pre-programmed messages when scrolling through the available message choices. These
custom messages can be deselected or overwritten, but never erased. If you do not wish to use all four
messages, simply program the desired messages with the pre-programmed or custom messages and
program the remaining messages with the “-NOT USED-” message located in the pre-programmed
message list. This message will not appear on the screen. When this message is encountered in the
message sequence, it automatically skips to the next message in the sequence without any time delay.
Welcome Prompts Example: To guide a customer through a transaction, the follow-
ing messages may be selected:
WELCOME MESSAGE #1 “TO ENTER LOT”
WELCOME MESSAGE #2 “DEPOSIT”
WELCOME MESSAGE #3 “-NOT USED-”
WELCOME MESSAGE #4 “-NOT USED-”
Closed Prompts
This category is used to select the sequencing messages that are displayed when the GOLD LINE
ACW PARKING is signaled that the lot is full or it is programmed to be disabled. There are up to four
sequencing messages possible. The four messages may be chosen from a list of pre-programmed mes-
sages or a custom message may be created. Up to eight different custom messages can be programmed.
