HAMAR LASER STEALTH Series, General Training Manual

Page: 11 / 113

7
The L-730 Precision Leveling Laser
Different applications require different levels of accuracy, which is
why we developed two accuracy levels for our leveling lasers.
The L-730 Precision Leveling Laser is ideal for precision-level work
where tolerances are not as critical, such as simple fabrication
alignment checks, fabrication machinery beds, soles plates, etc.
Features
•
Flatness capability to .00006 in/ft. (0.005 mm/m) in 90 degree
sweep
• Standard leveling capability of .00018 in/ft (0.015 mm/m)
•
100 ft. (30 m) radius operating range
•
Pitch/Roll Coarse Adjustment Base with coarse tilt resolution of
.010 in. in 100 ft. (0.25 mm in 30 m)
Applications Capabilities
• Fabrication machinery beds and guideway
•
Sole plates
• Flatness single and interrupted surfaces
•
Levelness
•
Platen parallelism (small presses and injection
molding machines
•
Parallelism vertical/horizontal surfaces
• Straightness
•
Tablet glass flatness
•
Machine bed guideway twist
•
Pitch and roll angular measurements
The L-740 Ultra-Precision Leveling Laser
The L-740 Ultra-Precision Leveling Laser is our most accurate and ultra-
precise laser. The L-740 is used for more demanding “mission critical” tasks,
such as: leveling machining centers, gantries, large-bed lathes, surface plates,
presses, turbine split joints, etc. where the four times greater accuracy is
required.
Features
•
Flatness capability to .000015 in/ft. (0.0013 mm/m) in 90 degree sweep
• Split-Prism leveling capability of .00006 in/ft (0.005 mm/m) with upgrade
• 100 ft. (30 m) radius operating range
•
Pitch/Roll Coarse/Fine Adjustment Base with coarse tilt resolution of .010
in. in 100 ft. (0.25 mm in 30 m) and fine tilt resolution of .001 in. in 100 ft.
(0.025 mm in 30 m)
Applications: Capabilities
•
Machine tool guideways
• Surface Plates
•
Sole plates
•
Flatness single and interrupted surfaces
• Levelness
•
Parallelism vertical/horizontal surfaces
•
Steam turbine split joints
• Platen parallelism – large presses and injection
molding machines
•
Straightness
• Machine bed guideway twist
•
Pitch and roll angular measurements
•
Tablet glass flatness