HAMAR LASER STEALTH Series, General Training Manual, Page: 36 / 113

32
4. Turn on the laser rotation (which also
turns on the targets). Target #1 data
displays in the Read9 software on the
PDA. Zero the display. Remove Target
#1 and replace it with Target #2. Zero
the Read9 display for Target #2. Repeat
the process for Target #3.
5. Spread out the targets on the table on
three reference points, two along the
Pitch Axis and one on the Roll Axis.
6. Looking at the data for Targets #1 and
#2, adjust the Pitch-Axis knobs on the
laser until the two values are equal.
Switch to Targets #1 and #3 and adjust
the Roll-Axis knobs on the laser until
those two values are equal. Now the
target values for all three targets are
equal and the laser plane is aligned to
the table.