HAMAR LASER STEALTH Series, General Training Manual

Page: 87 / 113

83
9
“OFF TGT” shown in
target display – PDA
• Radio communication is working, but the target does not “see” the laser.

Ensure laser beam is not blocked.

Ensure laser beam is bright.

Check laser power supply, especially if using a battery pack.
10
Cannot see level vials
•
Turn on level light switch.
•
Turn on master power switch.
• Check power supply connection.
11
“Runtime Error” in
software
•
Do not unplug the A-910 from the USB port while still using the program.
• Report to HLI the exact keystrokes that created the Runtime Error.
12
Software crashes upon
loading
• Ensure USB/Serial Converter cable is connected to the laptop’s USB port.
If problem persists, contact HLI.
13
PDA locks up
•
Hit RESET switch

Dell PDA – RESET is on right hand side of the back of PDA, near the
lower right corner of the radio module.

HP IPAQ – RESET is on bottom end of PDA.
14
PDA turns off
automatically
•
Check the Power Saving Options in the PDA (see PDA manual for
details).
15
PDA is frozen
• Check the lock switch on the side of the PDA. If that does not work, press
RESET.