Halytech
hydroSpider2 User’s Manual v1.23
Page 70
5.15
Manual Setup Management
The hydroSpider’s
Manual Setup Management
page gives you some useful options for working with
your hydroSpider’s setup/configuration:
Save Setup to Disk
: The hydroSpider’s entire setup can be downloaded to your computer.
This file can later be loaded into other hydroSpiders or kept for reference.
Load Setup from Disk
: This allows you to load a saved configuration file from your computer
into the hydroSpider. This will overwrite the hydroSpider’s current settings with those in the
loaded setup file.
Note
: the setup file has to be from a unit with the same or earlier software version (e.g. a
setup file from a unit running 1.43 software can be loaded into a device running 1.49, but
not the other way around).
Email Setup
: The setup file can be sent via email to the entered address. Note that email and
network settings will have to be set up for this to work.
Restore to Factory Defaults
: This option will set ALL of the hydroSpider’s settings to the
factory default values.
To access this page, click the
Manual Setup Management
link on the
Change Setup
page. This will
bring you to the
Manual Setup Management
page, shown below:
