Halytech
hydroSpider2 User’s Manual v1.23
Page 18
4.8
Change Setup
The
Change Setup
link brings you to a page which will allow you to change the hydroSpider’s
configuration. This page contains a number of links for accessing all of the available settings, saving
the setup file, and performing diagnostics.
To access the
Change Setup
page, click the
Change Setup
link located in the menu on the left hand
side of the web interface.
Each of these links is discussed in different sections throughout this document. For example, the
Input Setup link is discussed in Chapter 5.5 - Input Channels.
Note that, as indicated by the confirmation message, while in Change Setup, the hydroSpider will not
log its usual data. Entering change setup will, by default, also acknowledge all alarms and turn off all
controls. Changing this behaviour is discussed in Chapter 5.17 - Advanced Settings.