Halytech
hydroSpider2 User’s Manual v1.23
Page 21
5
Setting up the hydroSpider
A new hydroSpider is shipped with factory default settings. This chapter and following chapters will
guide you through customising these settings. It is recommended to set up the hydroSpider in the
following order:
1.
Location
2.
Date and Time
3.
Username and password
4.
Control names
5.
Input channels
6.
Channel calibration
7.
Network parameters
8.
9.
10.
Alarms
11.
Reports
12.
Perform modem diagnostics
13.
Automatic setup updates
14.
Automatic software updates
15.
Save a copy of the setup
To begin making changes to the settings, go to the Change Setup page as described in Chapter 4.8 –
Change Setup
This page gives you links to all the other pages required during the setup process.
