26
Settings
Affected Mode
Parameter
DESCRIPTION
Available Values
Default Value**
STIMULATION Modes
†
LOCK AVAILABLE VALUES?
Disable or enable selection
of the MOTOR and SENSORY
parameters. If “NO” is selected,
the MOTOR and SENSORY
parameters are greyed out and
not selectable.
Yes/No
Yes
MOTOR
(Hz)
Rate at which Motor stimulus
pulses are delivered.
1-Shot, 2, 5, 10, 20, 50, 75, 100,
150, 180 and 200 Hz
2 Hz
SENSORY
(Hz)
Rate at which Sensory stimulus
pulses are delivered.
1-Shot, 2, 5, 10, 20, 50, 75, 100,
150, 180 and 200 Hz
50 Hz
STIM INCREMENT
Minimum stimulus increment.
0.01, 0.02, 0.05, 0.10, 0.20 Volts
or mAmps
** Defaults are factory-set, and are overwritten when the SAVE SETTINGS function is used.
†
STIMULATION Modes refers to both VOLTAGE AND CURRENT STIMULATION Modes.
7.7.2
ADVANCED SETTINGS Mode – LESION SETTINGS State
The following screen appears when LESION SETTINGS is selected from the ADVANCED SETTINGS Mode.
• This screen allows adjustment of the initial RAMP TIME taken by the AUTO TEMP LESION and AUTO PULSED LESION modes to attain the SET TEMPERATURE.
• This screen allows adjustment of POWER LIMIT in AUTO TEMP LESION and AUTO PULSED LESION modes.
• Changing RAMP TIME affects the portion of the total TIME spent at the SET TEMPERATURE.
• Lowering the RAMP TIME causes the Generator to attempt to reach the SET TEMPERATURE faster.
• MAX RAMP TIME EXTENSION is the maximum allowable duration for extension of the ramp time in Multi-RF and Multi-Cooled RF Auto Temp Lesion mode, to maintain a
consistent Lesion Time. If all probes have not reached Set Temperature within the sum of this time and the specified Ramp Time, an error notification will be generated. This
feature can be turned off by changing the setting to DISABLE.
Figure 7-23 ADVANCED SETTINGS Mode — LESION SETTINGS Display
Avanos Exhibit 2069 Page 26
Medtronic, Inc. v. Avanos Medical Sales, LLC
Case IPR2020-0089
