6/1/99
All Hale products are quality components: ruggedly designed, accurately machined, precision inspected, carefully assembled
and thoroughly tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to
follow the instructions on care and operation. Proper use and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE.
DESCRIPTION, INSTALLATION AND
OPERATION
MANUAL
ROTARY GEAR PUMP
ELECTRONIC FOAM
PROPORTIONING SYSTEM
Hale Products cannot assume responsibility for product failure resulting from improper
maintenance or operation. Hale Products is responsible only to the limits stated in the product
warranty. Product specifications contained in this material are subject to change without notice.
HALE PRODUCTS, INC.
l
A Unit of IDEX Corporation
l
700 Spring Mill Avenue
l
Conshohocken, PA 19428
l
TEL: 610-825-6300
l
FAX: 610-825-6440
Hale FoamMaster System Serial Number: ____________________________
NOTICE:
This manual is divided into four sections for clarity and ease of use.
Section
I
: DESCRIPTION
; Provides an
introduction to the Hale Foammaster System along with guidelines for designing and ordering a complete system.
Section
II
: INSTALLATION
; Provides information to assist the OEM with installation and initial set-up of Hale FoamMaster
systems on an apparatus.
Section
III
: SET-UP AND CALIBRATION
; Is used by the installer and end user for start-up and
calibration of the Hale FoamMaster system.
Section
IV
: OPERATION
; Is primarily used by the apparatus user for proper
operation and maintenance of the Hale FoamMaster system. Each manual section can be a stand alone section or
can be used in conjunction with each other.
MANUAL P/N 029-0020-35-0, REV E, © 1999 HALE PRODUCTS, INC., PRINTED IN U.S.A.
