background image

Innovative Vehicle Solutions

www.haldex.com

Haldex develops and provides reliable and 
innovative solutions with focus on brake 
and air suspension products to the global 
commercial vehicle industry.
Listed on the Stockholm Stock Exchange, 
Haldex has annual sales of approximately 

 

3.9 billion SEK and employs about 

 

2,200 people.

Austria

Haldex Wien Ges.m.b.H.
Vienna
Tel.: +43 1 8 69 27 97
Fax: +43 1 8 69 27 97 27
E-Mail: [email protected]

Belgium

Haldex N.V.
Balegem 
Tel.: +32 9 363 90 00
Fax: +32 9 363 90 09
E-Mail: [email protected]

Brazil

Haldex do Brasil Ind. E Com.
Ltda
São José dos Campos
Tel.: +55 12 3935 4000
Fax: +55 12 3935 4018
E-Mail: [email protected] 

Canada

Haldex Ltd
Cambridge, Ontario
Tel.: +1 519 621 6722
Fax: +1 519 621 3924
E-Mail: [email protected]

China

Haldex Vehicle Products Co. Ltd.
Suzhou
Tel.: +86 512 8885 5301
Fax: +86 512 8765 6066
E-Mail: [email protected]

 

France

Haldex Europe SAS
Weyersheim
Tel.: +33 3 88 68 22 00
Fax: +33 3 88 68 22 09
E-Mail: [email protected] 

Germany

Haldex Brake Products GmbH
Heidelberg
Tel.: +49 6 221 7030
Fax: +49 6 221 703400
E-Mail: [email protected]

Hungary

Haldex Hungary Kft
Szentlörinckáta
Tel.: +36 29 631 300
Fax: +36 29 631 301
E-Mail: [email protected]

India

Haldex India Limited
Nashik
Tel.: +91 253 6699501
Fax: +91 253 2380729

Italy

Haldex Italia Srl.
Biassono
Tel.: +39 039 47 17 02
Fax: +39 039 27 54 309
E-Mail: [email protected]

©2013, Haldex AB. This material may contain Haldex 
trademarks and third party trademarks, trade names, 
corporate logos, graphics and emblems which are 
the property of their respective companies. The 
contents of this document may not be copied, 
distributed, adapted or displayed for commercial 
purposes or otherwise without prior written consent 
from Haldex.

Korea

Haldex Korea Ltd.
Seoul
Tel.: +82 2 2636 7545
Fax: +82 2 2636 7548
E-Mail: [email protected]

 

Mexico

Haldex de Mexico S.A. De C.V.
Monterrey
Tel.: +52 81 8156 9500
Fax: +52 81 8313 7090

Poland

Haldex Sp. z.o.o.
Praszka
Tel.: +48 34 350 11 00
Fax: +48 34 350 11 11
E-Mail: [email protected]

 

Russia

OOO “Haldex RUS”
Moscow
Tel.: +7 495 747 59 56
Fax: +7 495 786 39 70
E-Mail: [email protected] 

 

Spain

Haldex España S.A.
Granollers
Tel.: + 34 93 84 07 239
Fax: + 34 93 84 91 218
E-Mail: [email protected]

 

Sweden

Haldex Brake Products AB
Landskrona
Tel.: +46 418 47 60 00
Fax: +46 418 47 60 01
E-Mail: [email protected]

 

United Kingdom

Haldex Ltd.
Newton Aycliffe
Tel.: +44 1325 310 110
Fax: +44 1325 311 834
E-Mail: [email protected]

 

Haldex Brake Products Ltd.
Redditch
Tel.: +44 1527 499 499
Fax: +44 1527 499 500
E-Mail: [email protected]

USA

Haldex Brake Products Corp.
Kansas City
Tel.: +1 816 891 2470
Fax: +1 816 891 9447
E-Mail: [email protected]

006 300 018_GB/05.13/Haldex UK/07.2014

Summary of Contents for EB+ Gen3





































































































































Reviews: