Halcro UTSR1, Owner'S Manual, Page: 9 / 44

9
Note: If your Halcro Logic UTSR1 does not respond,
you can reset the remote by pressing the RESET key
inside the battery compartment (see illustration). This
product may need to be manually reset under high
electrostatic discharge.
Hot Keys
There are 3 Hot keys on the bottom of LCD display,

HOME Jump to main page

MENU Access main setup menu for
configuration/setting

MUTE Volume mute function
Hard Keys
There are 5 hard keys that transmit IR command
corresponding to device selected.

Power ON/OFF

CH+ Program up or Channel up

CH- Program down or Channel down

VOL+ Volume up

VOL- Volume down
Key Tone
When you tap any key, there is a short audible beep.
User can enable/disable this function from main menu
setting (for details, please refer to Remote Setting
section in this manual.)