Halcro UTSR1, Owner'S Manual, Page: 10 / 44

Remote Control
Backlight
There are two separate EL backlights for LCD screen
and hard keys, and will be turned ON separately.
Backlight will be turned ON for 5 seconds (factory
default setting) after a key is pressed, and user can
disable this function. (For details, please refer to
Remote Setting section in this manual.)
IR Codes Library
To setup a code, tap MENU once then select a
device to setup, choose a setup method. User can
setup by learning key command from an original
remote control, entering a code number, browsing
through brand name list, or searching through the
whole library. Refer to separate Code List for IR code
number of different device.
Configuration/Setting Up the Unit
Tap Menu, then choose any one of the following
items:
Setup – setup the pre-programmed code or learn key
command.

Tap SETUP from main menu

Select one of following setup methods
Learning
– learn or copy a key command from an
original remote control to Halcro Logic UTSR1

Tap Learning from Setup menu

Select a device where you would like to carry the
command keys (e.g. TV)

Tap a key to be learnt from the Halcro Logic UTSR1

Aim an original remote to the front of Halcro Logic
UTSR1. Press and hold the key until Halcro Logic
UTSR1 responds with a successful message
(approx. 5 seconds)

Edit the keyname or just tap OK to confirm

Tap another key to continue learning of the rest of
the useful commands

Tap MENU to return to main menu, or tap
HOME to return to main page