Halcro UTSR1, Owner'S Manual, Page: 16 / 44

Remote Control

Day of Week – adjust day of week

Tap Clock from Remote Setting menu

Tap Set to adjust date

Tap or to select day of week

Tap OK to confirm and exit the setting
Beep Sound – turn beep sound On/Off

Tap Beep Sound from Remote Setting menu

Tap Enable to turn on beep sound

Tap Disable to turn off beep sound
LCD – set up LCD related function

Light Auto Off: select backlight auto turn off at 5
Sec, 10 Sec or 15 Sec

Backlight Control: select an option of backlight
control method, By Sensor, Always On or Always
Off.
Password - create/enable or disable password
In order to keep your personal setting of the Halcro
Logic UTSR1 secure, you can activate the password
function for remote setting protection.

Enter password, max. 5 characters

Re-enter password for confirmation

Tap DELETE to delete last character

To disable password, give a blank input (no
characters) to password field
Note: Universal password is AAAAA
Reset Default
– reset user setting to factory default.
Warning: Please make sure it is necessary to perform
this function. Your Halcro Logic UTSR1 will be reset to
factory pre-loaded setting and all the learned
signals/custom setting will be erased.
Clear Learning – to clear learned command and
restore keys to default command.
One Key – to clear learned command and restore
keys to default command

Tap to select a device

Tap to select a key

Tap Yes to confirm or tap No to abort