Halcro UTSR1, Owner'S Manual, Page: 20 / 44

Remote Control
Clone
This function is used to copy user setting to another
Halcro Logic UTSR1. Tap
MENU, then tap Clone
and choose any one of the following items:
Note: Before you perform this function, please make
sure that you have two (2) Halcro Logic UTSR1s. You
have to identify which unit is the sender and which
one is the receiver. The sender is the unit which
contains data that will be transferred to another
Halcro Logic UTSR1 (receiver unit). The receiver is the
unit which will copy the signals from the sender.
Please keep both sender and receiver units face to
face at a distance of 5 to 8cm during the whole
cloning process.
Copy One Device – copy all user settings of a single
device from the sender to the receiver unit

On the receiver unit, tap Receive

On the sender unit, tap Copy One Device, then tap
to select a device (e.g. TV), all user settings in the
selected device will be sent out via the IR linking
from the sender to the receiver unit
Copy All Devices – copy all user settings of all devices
from the sender to the receiver unit

On the receiver unit, tap Receive

On the sender unit, tap Copy All Devices, all user
settings will be sent out via the IR linking from the
sender to the receiver unit, except Clock and
Password will be sent out via IR linking
Receive – receive data for Clone function (receiver
unit has to select this function in order to start cloning)
Enter into receiving mode, ready for receiving
incoming data.