Halcro UTSR1, Owner'S Manual, Page: 24 / 44

Docking Station
Quick Charger Function

Make sure that your Halcro Logic UTSR1 is installed
with 4xAAA NiMH rechargeable batteries and
remove the rubber protector

Make sure you have the DC power adaptor from
the Halcro Logic UTSR1 package

Put the power adaptor into AC wall outlet, insert
the DC jack to the power connector of the
Docking Station

Now, slide your Halcro Logic UTSR1 onto the
Docking Station until the connection pins are
locked

The Green LED of the Docking Station lights up.

It takes approximately 3 to 4 hours to fully charge
the remote

When the charging process is completed, the
Green LED of the Docking Station will be turned off

Press the Release button of the Docking Station to
release the Halcro Logic UTSR1
Remote Advanced Editing via Computer

Make sure that your computer is loaded with one
of the following operating systems: Windows
98SE, Windows 2000, Windows NT or Windows
XP

Download the Halcro Editor software from the
suggested website. Install the program and reboot
your system

Make sure your Halcro Logic UTSR1 is connected
with the Docking Station (See Quick Charge
Function, point 4)

Connect the supplied USB cable to the USB jack of
the Docking Station and one of the available USB
connectors of your computer system

Activate the PC Link function on the Halcro Logic
UTSR1 by tapping Menu and then, select PC Link