HAKO Citymaster 2200, Operating Manual

Page: 117 / 238

03-1481-00-00.fm
117
Operation
Stopping the vehicle
Braking with the drive
Observe the Safety instructions – Stopping and parking the vehicle, see
page 116.
The hydraulic brake force can be adjusted with the switch
Fig. 84-90
.
Press the switch according to the desired braking effect:
•
Switch in stage I: slight braking effect
• Switch in stage II: medium braking effect
•
Switch in stage III: strong braking effect
The respective symbol appears in the multifunction display.
•
Stage I: Symbol
Fig. 84-A
• Stage II: Symbol
Fig. 84-B
•
Stage III: Symbol
Fig. 84-C
1. Press the switch
Fig. 84-90
according to the desired braking effect.
2. Remove your foot from the accelerator pedal
Fig. 84-49
or move the
drive switch
Fig. 84-56
to the neutral position.
3. Gently press the brake pedal
Fig. 84-48
.
Braking with the brake pedal
Observe the Safety instructions – Stopping and parking the vehicle, see
page 116.
1. Remove your foot from the accelerator pedal
Fig. 84-49
.
2. Press the brake pedal
Fig. 84-48
until the vehicle comes to a standstill.
3. Move the direction indicator switch
Fig. 84-56
to the neutral position.
4. Operate the parking brake
Fig. 84-55
.
•
The warning light
Fig. 84-139
in the indicating device lights up.
A B C
Fig. 84:
48 49
56
55
139
90
Note
When the vehicle is braked sharply with the hydrostatic drive
or when the foot is abruptly removed from the accelerator
pedal, the brake lights are switched on to warn the vehicles
behind.