HAKO Citymaster 2200, Operating Manual

Page: 150 / 238

150
03-1481-00-00.fm
Operation
3.4.9 Hand suction hose (option)
The hand suction hose
Fig. 124-A
is used for effectively cleaning difficult-
to-reach points.
1. Start the vehicle, drive to the work site and hold it with the parking
brake.
2. Work with the insert plate
Fig. 124-B
in case of heavy soiling. To do so,
raise the dirt hopper with the tip switch
Fig. 124-108
and insert the
safety strut
Fig. 124-C
, see page 222.
3. Push the insert plate onto the rubber seal of the suction duct
Fig. 124-D
.
4. Move the dirt hopper back into its end position. To do so, unlock the
safety strut with the lever
Fig. 124-E
, see page 222.
5. Switch on sweeping and raise the suction mouth with the tip
switch
Fig. 124-108
.
6. Loosen the tension belt
Fig. 124-F
and the locks
Fig. 124-H
and use
the handle
Fig. 124-G
to remove the hand suction hose from the side of
the holder
Fig. 124-I
. Pay attention to the weight!
7. If dust formation is too great on dry ground, the fresh water supply can
be switched on to bind the dust. To do so, close the valves
Fig. 124-109
,
110
and
111
, switch on the fresh water pump with the
switch
Fig. 124-120
and open the hand valve
Fig. 124-J
at the hand
suction hose.
Fig. 124:
F
D
G H I A
C
108
B
109 110
111
120
J
E