HAKO Citymaster 2200, Operating Manual

Page: 118 / 238

118
03-1481-00-00.fm
Operation
Parking the vehicle
Parking the vehicle after the end of work
Observe the Safety instructions – Stopping and parking the vehicle, see
page 116.
1. Brake the vehicle and secure it with the parking brake, see page 116.
On inclinations secure the vehicle additionally against rolling away with
a wheel chock
Fig. 85-35
, if necessary.
2. Turn the ignition key in the ignition switch
Fig. 85-107
to position "
0
"
and remove it.
3. Lower the front-mounted equipment to the ground or lock the transport
protection device for road travel.
Parking the vehicle after operation at full power
Observe the Safety instructions – Stopping and parking the vehicle, see
page 116.
1. Allow the engine to run on for approx. 60 seconds so that the tempera-
ture can stabilise.
2. Turn the ignition key in the ignition switch
Fig. 85-107
to position "
0
"
and remove it.
3. Lock the doors after leaving the vehicle cab.
Parking the vehicle after a fault
Observe the Safety instructions – Stopping and parking the vehicle, see
page 116.
The engine must be switched off immediately on the occurrence of faults.
A vehicle left lying on public roads must be secured with the hazard warn-
ing flasher and warning triangle. If the electrical system has failed, the
vehicle must be secured with the warning light from the safety package
(option). The warning triangle and hazard light are in the safety package
(option).
Fig. 85:
55
35
0
107
P
I
II