background image

3

1. Error Messages

3-3

Er

ro

r Hand

ling

29

The memory capacity is insufficient.

Reduce the number set for [Number of Data to 
Save] under [Internal Storage Setting] or 
[Number of Monitoring Alarms] in the [Alarm 
Server] window.
Delete the following settings if not necessary.

• Multi-link/Multi-link2
• Ladder monitor
• Connected devices not in use

If the problem persists, contact your local 
distributor.

30

The number of registered items is too many.

Reduce the number of items.

31

The memory capacity for the registered items is 
insufficient.

Take the following action for the relevant 
screen.
Reduce the number set for [Number of 
Monitoring Alarms] in the [Alarm server] 
window.
Reduce the number of items placed on the 
screen.

32

The number of items that uses the memory 
exceeds the available number.

Reduce the number of items.

33

The maximum number of switches and lamps 
that can be set has been exceeded.

The number of switches and lamps placed on 
the screen has exceeded 4096. Switches and 
lamps on overlap displays are included in this 
number.
Reduce the number of switches and lamps.

34

The items that occupy the memory area exceed 
the available work memory capacity.

Reduce the amount of data.

35*

Variable length data error

Contact your local distributor.

36*

ITEM error

37*

Component ITEM error

38*

Component error

40*

Group byte count error

41*

Recognition flag error

42*

Function ITEM error

43*

Function ITEM end error

44*

Group ITEM end error

46

An unavailable device memory address is set or 
the available device memory range is 
exceeded.

Check the device memory setting.

47

IDs of the items having setting limitations in the 
screen library are duplicated on a screen.

Check the IDs and keep them unique.

49*

Group ITEM error

Contact your local distributor.

50*

Link ITEM error

51*

Editor ITEM error

52

The overlap ID is incorrect and must be a value 
from “0” to “9”.

Check the overlap ID and set correctly.

53

An overlap library number with no part 
registered is specified in the call-overlap setting.

Specify an overlap library number with a part 
registered.

55*

Multi-overlap header error

Contact your local distributor.

56*

Graphic undefined command error

57*

Graphic ITEM error

58*

Graphic execution error

59*

Switch function error

60

Switch operating area error

Reset the switch operating area.

Error No.

Contents

Solution

Summary of Contents for Monitouch V9 Series

















































































































Reviews: