3
3. WARNINGS, CAUTIONS AND NOTES
Warnings, cautions and notes are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
To prevent accidents or damage to the HAKKO FR-701, be sure to observe the following:
●
Do not use the unit for applications other than soldering or desoldering.
●
Do not strike the handpiece against hard objects to remove excess solder. This will
damage the handpiece.
●
Do not modify the HAKKO FR-701.
●
Use only genuine HAKKO replacement parts.
●
Do not allow the HAKKO FR-701 to become wet, or use it when hands are wet.
●
Be sure to hold the plug when inserting or removing the handpiece and power cords.
●
Be sure the work area is well ventilated. Soldering and desoldering produces smoke.
●
While using the HAKKO FR-701, don't do anything which may cause bodily harm
or physical damage.
WARNING
CAUTION
WARNING ：
Failure to comply with a WARNING may result in serious injury or death.
CAUTION ：
Failure to comply with a CAUTION may result in injury to the operator,
or damage to the items involved.
NOTE ：
A NOTE indicates a procedure or point that is important to the process
being described.
When power is ON, the tip and nozzle will be hot. To avoid injury or damage to
personnel and items in the work area, observe the following:
●
Do not touch the tip and nozzle or the metal parts near the tip and nozzle.
●
Do not allow the tip and nozzle to come close to, or touch, flammable materials.
●
Inform others in the area that the unit is hot and should not be touched.
●
Turn the power off when not in use, or left unattended.
●
Turn the power off when changing parts or storing the HAKKO FR-701.
●
This unit is for counter or workbench use only.
●
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in safe way and understand the hazards involved.
●
Children shall not play with the appliance.
●
Cleaning and user maintenance shall not be made by
children without supervision.
4
4. PART NAMES (Soldering iron)
●
When using the HAKKO FX-8802 / FX-8803 / FX-8804, please use the applicable iron holder.
●
Each HAKKO handpiece with the exception of the HAKKO FX-8801 / FX-8805 has their own
instruction manual. Please refer to this manual for specifications and replacement parts.
●
Station
SOLDER
DESOLDER
UP
Clogging
Indicator
DOWN
ENTER
POWER
FR-701
UP
ENTER
Power cord
receptacle
Fuse
Receptacle
(Soldering iron)
Power Switch
(Soldering iron)
Power Switch (Main)
Soldering
Desoldering
Control Buttons
(Soldering iron)
* Use this product with the following models.
(Soldering iron)
・
HAKKO FX-8801
｛
Soldering iron (M)
｝
・
HAKKO FX-8802
(Soldering iron N
2
Type)
・
HAKKO FX-8803
(Soldering gun)
・
HAKKO FX-8804
(SMD Hot tweezer)
・
HAKKO FX-8805
｛
Soldering iron (L)
｝
●
Soldering iron (HAKKO FX-8801
)
Soldering tip
Cord assembly
Heating element
(Inside)
