background image

29

● 

Vacuum Mode

1. Move the cursor to select “VacuumMode”.

After selecting, press <ENT>.

2. Normal and Timer will be switched alternately 

if you press the <

> or <

> button.

3. Return to parameter setting display 

if you press the <ENT> button after 

setting.

● 

Vacuum Time

1. Move the cursor to select “Vacuum Time”.

After selecting, press <ENT>.

2. Press the <

> or <

> button, you can 

change to the desired value.

3. Return to parameter setting display 

if you press the <ENT> button after 

setting.

* When selecting “Timer”

“Vacuum Time” appears under “VacuumMode” in the parameter select screen.

Select whether you manually operate the desoldering pump or use the timer function.
Normal

Solder is sucked only when you are pulling the trigger.

Timer

Even after you release the trigger, sucking continues for the specified period of time.

* Set time in “Vacuum Time”.

<↑>

<↓>

<ENT>

T e m p   M o d e
S h u t O f f   S e t
V a c u umM o d e

゚ C

O F F
NOR

<↑>

<↓>

<ENT>

V a c u u m  M o d e   S e t
     
     T i me r

Select

“Normal”

Select

“Timer”

(Vacuum Time)

<↑>

<↓>

<ENT>

S h u t O f f   S e t
V a c u umM o d e
V a c u um  T i me

O F F

T I ME

1s

<↑>

<↓>

<ENT>

V a c u u m   T i me   S e t

     0 s e c

14. PARAMETER SETTING (Desoldering Tool) (continued)

30

● 

Auto Sleep

1. Move the cursor to select “Auto Sleep”.

 After selecting, press <ENT>.

Select whether you will activate the auto sleep function. When the auto sleep function is 

set to on and no operation is performed for constant time after the handpiece is set in the 

iron holder, the auto sleep function will be enabled and the temperature of the handpiece 

declines to the controlled degree.
*  The auto sleep temperature can be set in “Sleep Temp”

.

2. ON and OFF will be switched alternately 

if you press the <

> or <

> button.

3. Selecting “ON” allows you to make the 

setting for “Timer”. 

(Default is 6 minutes.)

* When selecting “ON”

4. When setting “Auto Sleep” to “ON”, 

the area for “Timer” flashes.

5. Press the <

> or <

> button, you can 

change to the desired value.

6. Pressing the <ENT> button after this change 

makes the set time stored in the internal 

memory.

<↑>

<↓>

<ENT>

S h u t O f f   S e t
V a c u umM o d e
A u t o   S l e e p

O F F
NOR
O F F

<↑>

<↓>

<ENT>

 

A u t o   S l e e p   S e t

A u t o   S l e e p    

O F F

T i me r         

06

m

<↑>

<↓>

<ENT>

 

A u t o   S l e e p   S e t

A u t o   S l e e p     

ON

T i me r         

6

m

Select

“OFF”

Select

“ON”

<↑>

<↓>

<ENT>

S h u t O f f   S e t
V a c u umM o d e
A u t o   S l e e p

O F F
NOR
06

m

Summary of Contents for FR-701





















































Reviews: