25
●
Preset ID (Setting of each preset name)
1.
Move the cursor to select “Preset ID”. After selecting, press <ENT>.
2. Move up and down the cursor with the control buttons.
After selecting, press <ENT>.
3. Press the <
↑
> or <
↓
> to set the desired figure.
Press the <ENT> button to advance to the next digit.
4. To exit from setting screen, scroll the screen, select <EXIT>, and press the
<ENT> button.
CAUTION
As a preset ID, 1 to 8 characters can be used.
Usable characters are “A - Z”, “0 - 9”, and space (“ ”). Entering a space makes your
entry terminated. Any character(s) that follows the space is deleted.
<↑>
<↓>
<ENT>
V a c u u m C h e c k
P r e s e t T e m p
P r e s e t I D
<↑>
<↓>
<ENT>
P 1 I D S E T
R E S E T 1
<↑>
<↓>
<ENT>
P 1 I D P R E S E T 1
P 2 I D P R E S E T 2
P 3 I D P R E S E T 3
<↑>
<↓>
<ENT>
P 2 I D P R E S E T 2
P 3 I D P R E S E T 3
< E X I T >
13. OPERATION (Desoldering Tool) (continued)
26
●
LCD Contrast (Contrast adjustment of display screen)
1. Move the cursor to select “LCD Contrast”. After selecting, press <ENT>.
To make the screen display easy to see, adjust contrast.
2. Press the <
↑
> or <
↓
> to set the adjust contrast.
(Selection range is 1 to 25.)
3. After selecting the value, press <ENT> to return to the selection button.
To exit from each setting screen, scroll the screen, select <EXIT>, and press
the <ENT> button.
<↑>
<↓>
<ENT>
P r e s e t T e m p
P r e s e t I D
L C D C o n t r a s t
<↑>
<↓>
<ENT>
L C D C o n t r a s t
A d j u s t me n t
0
<↑>
<↓>
<ENT>
P r e s e t I D
L C D C o n t r a s t
< E X I T >
