Hakko Electronics fm-206, Instruction Manual

Page: 4 / 19

5. OPERATION
■
Various setting changes (Preset select)
●
Range of preset temperatures
Grip
HAKKO FM-2027 / FM-2026
MODEL FM-2022 / FM-2023
MODEL FM-2024
HAKKO FM-2030 / FM-2031
HAKKO FM-2029 Initial Value
300/350/400
℃ (570/660/750 ℉ )
300/350/400 ℃ (570/660/750 ℉ )
350/375/400 ℃ (660/700/750 ℉ )
300/350/400 ℃ (570/660/750 ℉ )
300/350/400 ℃ (570/660/750 ℉ )
Initial preset temperatures for each grip
* When the acceptable setting range is exceeded it will
return to the initial setting.
(For the setting range, refer to "Initial preset temperatures
for each grip.")
**The setting temperature, offset temperature, preset
temperature, and preset name are remembered by
each grip.
1. Press the control button for the channel you want to change.
The display screen will switch to the preset selection screen shown below.
Set Temp 350 ℃
PRESET1
PRESET2
PRESET3
300 ℃
350 ℃
400 ℃
E x i t
C H 1 P r e s e t S e l e c t
CH1 CH2 CH3
350
℃
Off Off
SOL
2. By turning the control knob, the preset temperature to be selected will change.
Set Temp 350 ℃
PRESET1
PRESET2
PRESET3
300 ℃
350 ℃
400 ℃
E x i t
C H 1 P r e s e t S e l e c t
Set Temp 350 ℃
PRESET1
PRESET2
PRESET3
300 ℃
350 ℃
400 ℃
E x i t
C H 1 P r e s e t S e l e c t
3. Press the control knob when the desired preset temperature is highlighted.
The iron tip will now be set to the selected preset temperature.
Set Temp 350 ℃
PRESET1
PRESET2
PRESET3
300 ℃
350 ℃
400 ℃
E x i t
C H 1 P r e s e t S e l e c t
CH1 CH2 CH3
400
℃
Off Off
SOL
* Should you press another control button while in the preset selection screen, it will shift to that channel's
preset selection screen if the channel is in operation, and it will return to the screen before the preset
selection screen if the channel is not in operation.
Set Temp
Offset Temp
Preset Temp
Preset ID
CH Power
Initial Value
350
℃ (750 ℉ )
0 ℃ (0 ℉ )
(Varies by grip)
PRESET1 / PRESET2 / PRESET3
ON
Items that can be changed during normal operation and initial setting
Possible Change Range
Refer to "Temperature ranges for each grip."
+/- 50
℃ (+/- 90 ℉ )
Refer to "Temperature ranges for each grip."
Input up to 7 characters (English nu '_').
ON / OFF
*For setting items pertaining to the HAKKO FM-2029 Hot Air Pencil, please refer to "Settings for the
HAKKO FM-2029 Hot Air Pencil" later in this manual.
Grip
HAKKO FM-2027 / FM-2026
MODEL FM-2022 / FM-2023
HAKKO FM-2024
HAKKO FM-2030 / FM-2031
HAKKO FM-2029 Setting Temperature Range
200
〜 450 ℃ （ 400 〜 840 ℉ ）
200 〜 400 ℃ （ 400 〜 750 ℉ ）
350 〜 450 ℃ （ 660 〜 840 ℉ ）
200 〜 500 ℃ （ 400 〜 930 ℉ ）
100 〜 550 ℃ （ 200 〜 1030 ℉ ）
Temperature range for each grip
1. Press and hold the control button for the channel you want to change for approximately 1 second.
The display screen will switch to the setting selection screen shown below.
Set Temp
Offset Temp
Preset Temp
Preset ID
Ch Power
Exit
350 ℃
00 ℃
ON
CH1
CH1 CH2 CH3
350
℃
Off Off
SOL
2. Select the item you want to change in the screen above by turning the control knob to highlight the item,
and press the control knob to change the setting. When you are finished, turn the control knob to select
EXIT and press the control knob.
CH1 CH2 CH3
350
℃
Off Off
SOL
Set Temp
Offset Temp
Preset Temp
Preset ID
Ch Power
Exit
350 ℃
00 ℃
ON
CH1
●
Selecting the Preset Temperature
■
Changing various settings (other than preset selections)
●
Setting items, possible change range and initial value
●
Change procedures (initial and when finished)
4