![background image](http://html1.mh-extra.com/html/hakko-electronics/470b/470b_instruction-manual_3301766005.webp)
Station
4
Temperature Control Knob
Provides nozzle temperature
control. (refer to p.7)
Temperature Control Set
Screw Clamp
Prevents the temperature
control knob from being reset.
(refer to p.7)
Power Lamp
Lights up when the
power switch is
turned to ON.
Power Switch
When turned to ON,
the heating element
starts to heat up.
CAL (Calibration)
Used for calibrating
the temperature
after replacing the
Heating Element.
Receptacle
Connector for the cord
assembly.
Vacuum Outlet Cap
Set the ceramic paper filter (S)
(No, A1009).
Connects with the hose, Filter
inside vacuum outlet cap is
expendable.
Fuse Holder
·120V unit contains
250V-2A (U) fuse.
Power Cord