5
Operation
CAUTION
The spring iron holder becomes
extremely hot during operation of the
desoldering gun. Do not touch the
spring iron holder during and
immediately after using the gun.
CAUTION
The sponge is compressed.
It will swell when moistened with water.
Be sure to dampen the sponge with
water before use.
Be sure to remove the round portion
of the sponge.
Spring Iron Holder
(No. B1094)
Cleaning Pin Holder
(No. B1095)
Securely insert the
cleaning pin holder.
Cleaning Sponge
Iron Holder Base
Tube (red)
Preparation–Assembly and Connection
Assemble the Hakko 470B on a flat surface.
Remove the pump securing
screws (M4x25 marked red)
from the bottom of the station.
Assemble the iron holder.
·Set the spring iron holder and
cleaning pin holder in the iron
holder base.
·Dampen the cleaning sponge
with water and then squeeze
it dry.
Insert the desoldering gun
and cleaning pins.
·Fully insert the desoldering
gun into the spring iron holder.