If the fixing plate is difficult to remove,
apply hot air to it to warm it up.
Never use excessive force to remove
the plate as it is easy to bend, and a
bent plate will allow air to leak out and
reduce solder vacuuming efficiency.
CAUTION
Clean the plates only with alcohol or
thinner.
CAUTION
When assembling the pump, be sure
to check for air leaks.
CAUTION
Unplug the power cord before
starting this procedure.
WARNING
Replace:
If the valve plate is bent or stiff,
replace it.
·If the exhaust filter is dirty,
replace it.
Cleaning the Pump
Disassemble the pump
heads.
Clean the pump head.
·Remove the valve plate and
fixing plate.
·Remove any flux adhering to
the plates.
Assemble the pump heads.
·Remove the rear panel.
·Remove the cover.
·Remove the pump head from
each side of the pump.
Reassemble the valve plate
and fixing plate.
16
Cover
Remove
the cover screws.
(right / left)
Remove
the screws.
Rear Panel
Clean the pump head
and fixing plate.
Fixing Plate
Valve Plate
Exhaust Filter
Pump Head
Pump Head
Valve Plate
Fixing Plate
Be sure the parts are
aligned correctly.