manualshive.com logo in svg

Haier YR-E17, Operation & Installation Manual

The Haier YR-E17 is an exceptional home appliance with a user-friendly design. Ensure efficient usage and seamless installation with the comprehensive Operation & Installation Manual. This manual is available for free download at manualshive.com, providing step-by-step instructions and valuable insights for optimal performance and customer satisfaction.

Share
Download
background image

44

Operation

If there is no communication between wired controller and 
indoor unit for 4 minutes, it will display error code “07” when 
checking malfunction. 

Communication Malfunction of Wired Controller

If the dip switch is set to collect ambient Temp. from wired 
controller and the sensor can’t work normally, it will display 
error code “01” when checking malfunction. 

Sensor Malfunction

(1) In OFF state, keep pressing 

 key for 5 seconds, the 

current temp. compensation value is displayed on the top-right 

of the screen and flashes. “00” is the default value.

(2) When in celsius system, ambient compensation value is 
-04~+04°C, while in fahrenheit system, ambient compensation 
value being -07~+07°F. The temp. compensation value can be 
adjusted by pressing     .
(3) After adjustment, press 

 key to confirm the setting.

(4) The compensation value is used for ambient temp..
(5) The compensation value is valid only in the state of 
collecting ambient temp. of wired controller.

Temp. Compensation Setting

Summary of Contents for YR-E17





















































Reviews:

No comments

Related manuals for YR-E17

Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Brand: Fairchild Pages: 2
Fagor 101 Operating Manual preview
101
Brand: Fagor Pages: 103
Panasonic FP0 Series Specifications preview
FP0 Series
Brand: Panasonic Pages: 27
Panasonic CZ-64ESMC2 Instruction Manual preview
CZ-64ESMC2
Brand: Panasonic Pages: 78
Panasonic GM1 Series Reference Manual preview
GM1 Series
Brand: Panasonic Pages: 98
NAiS FP0 Series Hardware Manual preview
FP0 Series
Brand: NAiS Pages: 173
Panasonic SL-VGU1-EC Instruction Manual preview
SL-VGU1-EC
Brand: Panasonic Pages: 2
ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
TA Hydronics STS Technical Description preview
STS
Brand: TA Hydronics Pages: 14
Hach sc200 Software Update preview
sc200
Brand: Hach Pages: 2
Hach ORBISPHERE 410 Quick Operator'S Manual preview
ORBISPHERE 410
Brand: Hach Pages: 12
Hach AS950 AWRS Basic Operations preview
AS950 AWRS
Brand: Hach Pages: 472
Hach sc1000 User Manual preview
sc1000
Brand: Hach Pages: 64
V2 ELETTRONICA CL1 Quick Start Manual preview
CL1
Brand: V2 ELETTRONICA Pages: 6
Hach SC4500 Basic User Manual preview
SC4500
Brand: Hach Pages: 210
Hanwell MS1000 Installation Manual preview
MS1000
Brand: Hanwell Pages: 34
HANSONG BM240 User Manual preview
BM240
Brand: HANSONG Pages: 11
Datapath HX4 Quick Start Manual preview
HX4
Brand: Datapath Pages: 12

Brands by name

Popular brands

Load more brands